cat flaps for french doors flaps allow your pet to leave and come whenever they want, without you needing to let them in or out. They also can help to stop your cat from urinating in the house.

It is easier to install a cat flap on a Upvc panel than one made of glass, but you will require some expertise and appropriate tools.

Take a look at the Door

Fitting a cat flap in a door can be tricky but if you use the correct type of cat flap, take your time and follow the directions provided, it shouldn't be too difficult. We will show you how to draw the shape and then use an jigsaw to cut out the door's area. Then we will finish the job by attaching the flap. This will ensure that the flap stays in position and protects the doors from damage caused by wind and rain.

The first thing to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap you'll need. This will enable you to select a flap that is large enough to allow your pet to enter the home and exit without having to open the door every time.

If your kit has an illustration of where to drill, then put it on the door, and then draw around it. If your door has a moulding or sill on the bottom edge of it ensure you have enough clearance from these to keep your cat safe and prevent them gaining access to your home.

Next put on your eye protection as well as a dust mask and using a jigsaw begin to cut along the line that you've drawn in, but don't push the blade too hard, as this can cause it to cut more quickly than you would like it to. Utilize a set square to ensure that you are cutting the material properly and that the cut is a rectangle. When you are happy with the result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go in and out without worrying about them being in the house with a visitor, or leaving unwanted gifts in the home. It also prevents drafts and helps to keep the temperature in your home stable. However, fitting the cat flap to your door might seem like an intimidating task for those who haven't done it before, leading many people to seek out a professional joiner or carpenter to do the job. While this is certainly an option, it is possible to do the work yourself if you own the proper tools and follow instructions with care.

This is much simpler to do on a wooden door, but it is possible with uPVC. However you should be cautious not to harm the doors as this could make it impossible to claim your warranty. First, you need to measure the door to make sure it will accommodate the new cat-flap. If you have an ordinary uPVC panel it's easy. However when your door is composite or another type of door, you may have to be more cautious.

The next step is to measure the height of your cat's belly. This is the height between the floor and the underside of your cat's stomach. You'll need to find an area at the entrance that allows your cat to comfortably pass through. Once you've got the information, you'll need to mark the area using a spirit level and a pencil so you know the hole will fit your cat.

Once you've marked the area, it is time to cut out the hole. You will require the jigsaw, and it is important that you take your time to ensure that the cuts are clean and smooth, rather than rough and uneven, as it could cause damage to your door. You should also remember to wear safety glasses and a dust mask at all times when working with the jigsaw as dust from the saw could be harmful to your health. After you've finished the cutting, you'll need to smooth out the edges of the hole with sandpaper, so that the cat flap will fit easily in place.

Make a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to tackle the task yourself, but unless you have plenty of expertise in DIY, it's likely to be best to have an expert to complete the task for you. A mistake could not only be unsightly, but also pose security risks. It could let cold air to enter when the cat is outside and hot air out when it is inside.

The first thing you need to do is mark out the position of the hole in the door with pencil and a spirit level. This will ensure that it is correctly placed and runs in a straight line with the other parts of the door. Make sure to have sandpaper in your possession to smooth any rough edges.

Wear the safety equipment you'll need to use the power tool. If you are worried about the sound of the jigsaw, consider buying a cordless version which is quieter and more user-friendly to use.

It is important that you only cut away the material required for the fitment of the cat flap cover for winter flap. It is essential to leave a bit of material to make the wall thickness of the cat flap. However cutting off too much material can cause problems or even damage the door frame.

If the upvc door has a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need make an oversize hole to ensure that the metal doesn't get in contact with the walls of the flap.

If you're planning to install a cat flap into the frame of a double glazed window with a metal frame, you'll need to speak to a professional who will provide you with a new pane of glass that already has the hole for the cat flap in it. This will be cheaper than trying to fit the flap into an existing pane that was not designed for this purpose.

Place the Flap

cat flap cover for winter flaps allow your pet the freedom to come and go whenever they want and allow them to be comfortable at home whenever they'd like. However, if you own a uPVC door it can be difficult to install a cat flap, especially if you don't own a glass pane that can be cut to fit one. If you're able to buy and install a half-glazed replacement uPVC panel, it's possible to add a cat flap to the doors. It's not as simple as just cutting a hole in the door though and there are some things you'll need to do first to ensure it's safe.

A composite, uPVC or GRP door panel is usually composed of a plastic skin that is bonded to an insulating polystyrene core. The material is quite fragile and care must be taken when cutting through it to avoid damaging. This kind door has a template you can use to cut the hole.

After you have carved out the opening in your front door, it is time to put in the cat flap. You can buy and fit a wide variety of different models, from basic push-button operated ones to microchip activated units that allow only your pet. Whatever kind of cat flap you pick it's essential that your cat can use the flap comfortably without getting stuck outside in the rain.

It's a good idea opt for a circular fitting cat flap in upvc door panel rather than one that is square, since circles are more securely cut into door glass. This is because square holes are more likely to crack the glass when they are drilled. It's also a much safer option to use as you don't risk having to drill into toughened glass that could shatter and cause injury to your pet or family members. This is particularly important if there are elderly or children in your home who might be injured by glass fragments.