Sliding Patio Doors Repairs

Your sliding patio doors will bring in natural light to your home and increase the efficiency of your home's energy usage. However, with time, they may begin to show signs of wear and tear, which will require some maintenance.

Luckily, most of the problems with sliding patio doors are fairly simple to address. Find out how you can keep your sliding patio doors looking like new.

Tracks that are damaged or dirty Tracks

One of the most frequent reasons for sliding patio doors repair doors that do not open is dirty or clogged tracks. Over time, the dirt and grime from everyday use can accumulate on the track. This can cause the jam to break or even break completely.

Including regular light cleaning of sliding doors and tracks in your chores at home can help reduce the accumulation. Start by brushing or vacuuming any big debris from the tracks, and then wipe them clean using warm water and a non-abrasive cleaning product like dish soap. Adding a bit of vinegar to your cleaning product can help in removing stubborn grease and dirt stains.

If you find that your sliding door doesn't move smoothly after completing these steps, it may be the sign of more severe damage and requires a professional repair or replacement. There are a variety of simple fixes you could try before calling the professionals to save on costly repairs or replacements.

Place a doormat under your sliding doors. This will help to catch dirt before it gets to the tracks. Regularly trim any plants and bushes that are in close proximity to the sliding door to decrease the amount of debris that gets tracked into the tracks. Make sure to close the door correctly so that it doesn't crash into the tracks and damage the wheels and rollers. By keeping your doors clean and lubricated you can extend their lifespan substantially.

Rollers that are misaligned

Occasionally the sliding patio door can become unbalanced or becomes stuck. It is usually due to obstructions such as dirt or other which can be easily removed. Sometimes, it's due to bent tracks or a bent roller. In the latter case it is possible to re-align the roller by taking them out by using their adjustment screws and cleaning them with rubbing alcohol. Be careful, as these parts are fragile.

If your doors remain stuck, you can try applying lubrication to the rollers to decrease friction and make it easier for them to slide. Use a silicone-based product, because petroleum-based lubricants may attract dirt more quickly. It is crucial to clean the tracks and rollers prior to applying lubrication.

After you've cleaned your rollers, you can reinstall them using their adjustment screws. It is recommended to use the same lubricant you used to clean them. Make sure you push the rollers completely into their channels before reinstalling them. Then, you can test your door to determine whether it is now sliding smoothly.

If the issue persists it could be necessary to take down your door and examine the rollers and tracks for more significant problems. If the tracks or rollers are bent badly they might need to be replaced. In this case it's best to contact an expert to install the tracks.

Warped Glass

Sliding glass door are great to bring the outdoors into a room and letting in natural sunlight however, they can also be prone to damage that needs repair or replacement. Some of the most common problems that occur include cracking, warping and fade. The materials that make up the sliding glass patio doors start to break down when exposed sunlight, heat and other environmental elements. Cracking is often caused by impact damage such as the impact of a lawnmowers blade or ball that is smashed into the door. Fading usually occurs because of repeated exposure to sunlight and other elements.

If you have sliding patio door repairs near me glass patio doors that are difficult to close and open it could indicate that the rollers and tracks do not work properly. This could be due to accumulation of dirt, rust or debris in the track, wheels that are not aligned or an absence of lubrication. This issue can be fixed by cleaning the tracks, rollers and removing obstructions.

The locking mechanism could be faulty and make it difficult to open and close your sliding patio doors. This could be caused by an issue with alignment or wear and tear but a simple fix is to adjust the locking mechanisms by using the adjustment screws located at the bottom of the track.

Drafts or air leaks that occur around your sliding upvc patio door repairs near me doors are a common problem that can drastically decrease their energy efficiency. They usually result from worn weather stripping and an improper alignment of the door and can be easily corrected by replacing the old weather stripping and realigning the doors.

Loose Handle

If the handle of a sliding door becomes loose, it could be quite frustrating and make it difficult for people to open the door. This issue is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that secure it and then tightening them until they're snug against the door jamb.

Another common reason for a loose handle is that it has separated from the spindle that connects the handles' exterior and interior. This usually happens as a result of a mix of factors, including over use or wear and tear or just general ageing. If the issue isn't addressed quickly, the handle may be loosened and fall off.

The best method to solve this issue is by first finding the screws that join the interior and exterior handles. They are usually hidden by tabs made of plastic that can be removed with a flathead screwdriver (or in the case of certain handle styles, a Phillips-head screwdriver). Store these screws safely to prevent them from being lost.

Once the old handles have been removed, the next step is to remove the spindle that has become loose. This can be accomplished by tapping the end with a mallet or hammer until it falls free from its place inside the door. Then, the new handle can be fitted by simply placing the spindle through the hole in the interior handle and then placing the other end of the spindle through the hole on the exterior handle. Once the handle is installed and tightened, screw back the screws, and then check to ensure that the lock and unlock mechanism functions correctly.

Unusual Weatherstripping

A worn or cracked weatherstripping may allow water and air to seep through your patio doors, compromising the comfort and energy efficiency of your home. It could let in moisture and create drafts, which will increase your cooling and heating costs. Fortunately, replacing faulty weatherstripping is a simple fix that doesn't require any professional help. You can take off the old weatherstripping by loosening the staples using an screwdriver, or gently squeezing it with a putty knife and taking it off the door. Clean the area, and then apply an additional layer of weatherstripping that is secured by a foam seal. This will stop leaks and increase comfort.

If your sliding emergency patio door repair door isn't functioning as it should, you need to address the issue immediately to prevent further damage and to ensure that they are functional for years to come. Depending on the degree of the issue, DIY or professional repair/replacement could be the best option.

The majority of sliding patio door issues are caused by dirty rollers, misaligned tracks, and an untidy handle. In the majority of instances, these issues can be addressed with regular maintenance and cleaning, including lubricating the track and rollers, as well as adjusting them and tightening hardware. However, if these measures don't work, it's best to seek advice from a professional to ensure that your patio door is operating exactly as it should. Check the warranty information before you decide to repair or replace your patio door. This could save you money on repairs or replacements in the near future.