Add a Sparkle to Your Fiat 500 Key Fob

These cute Silicone Covers are sure to add some fun to your Fiat 500 Key fob. They are simple to install and snap into place of the original black cover.

The silicone covers shield the keys from splashes, dust and other contaminants. They also make your keys look more stylish. The signals generated by the key remote control are not hindered and can be used even when the cover is in place.

Guard your key from splashes, dust, and other contaminants

This silicone cover will give a classy look to your key. It fits perfectly around your key fob and does not move. It shields your key from dust and splashes. The signals emitted by your key remote are not affected by the silicone cover, so you can use the buttons on your key fob just as normal.

Accessorize your fiat ducato key programming 500 in Grey or Black with these cool covers. They are ideal if your original key cover is starting to look worn out, scratched or scratched. The covers are made of high-quality silicone and come with two key rings so you can swap them out in case you get bored of one color.

These covers replace the stock, black key cover on your vehicle. These covers will not fit if you already have the original key cover installed.

Great look!

Fiat are a truly unqiue and well-known Italian brand, and their cars have a great style that sets them apart from the rest. These stylish car key covers are a simple and fun method where to get a fiat key cut add a bit of elegance to your keys without becoming too overwhelming. They look stunning on your key fob and help to refresh an old-fashioned one.

The covers snap easily into place and are designed to replace the original black cover. It is best to remove the original cover prior to installing the new one.

The Fiat logo is printed in both Grey and black. You can change it at any time! These are also great gifts for Fiat 500 drivers.

Easy to install

replacement fiat key 500 key covers can be a great option to make your keys more modern. You can pick from a wide range of styles and colors to find the one that is most appropriate to your personality. The greatest thing is that they are easy to install, meaning you can do it yourself within a matter of 10 minutes. You'll require a screwdriver and some patience. The first step is to remove the old cover from your key. This must be removed before the new cover can be installed.

After removing the cover After removing the cover, you can make use of a flathead tool to remove the four major attachment clips from the driver side of the fob assembly. They are marked with red on the image below. Also note the tabs that locate slots shown in yellow that require disengagement as well.

After taking the battery off, replace it with a brand new CR2032 3 Volt coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening on the fob, and that the -" negative side is facing toward the rubber buttons.

Reattach the passenger-side mirror cover by aligning the locating tabs. Once you've done that, put the driver-side fob back into the vehicle and test it. Press the push button located at the top of the key. If everything is working correctly, the parking lights should be lit and the doors will automatically close.

Easy to remove

Fiat 500 Key Covers can be the perfect way to update your key fob. They are easy to install and have a unique look. They also shield your key fob from scratches and smudges. But, before you install a new cover for your key, you must remove the original cover from your vehicle.

It is as easy as pressing the red "Fiat" button on the front of your key fob. By pressing the button, you will release an lever that permits you to remove the metal key ignition switch (1). After removing the key, you will see the small silver-colored round switch with images of a locked and unlocked padlock on top of it. This is the key fob battery switch. The battery is easy to replace by turning the switch for a quarter turn using a tiny flathead screwdriver.

The key fob is equipped with an internal microchip that is used to communicate with the Body Control Module (BCM). When you insert the key into your fiat 500 Locked keys in car key fob, it press the ignition switch, which acts as an "key-in-ignition" reminder. The BCM will detect the transponder in the key fob, to verify that it's a valid key.

You can also add the sport design twin pack for a unique, funky look to your key covers. These covers snap in place over the original cover. They are available in Cream and silver. The key cover will only work when you remove the black cover from your key fob.