Patio Doors Repair - How to Fix a Wet Dog and Save Your Dog From Cold, Wet Feet

patio door repair company near me doors can provide a convenient and comfortable transition between your home and outdoor space. They can also help you save money on cooling and heating bills by keeping air within your home.

Over time the luster of your sliding glass or French door can fade. Fortunately, simple fixes can keep them looking and working as new.

Weatherstripping

You're walking your dog to the park at 5 AM, and you end up in a puddle right next to your sliding patio door. You look around and realize that the rain of last night has blown through the seals of your patio doors. Don't panic and be prepared for this to be a simple task in five minutes. With a bit of patience and a few simple tools you can fix the problem and prevent your dog's feet from getting cold and wet.

The key is to replace the weatherstripping which seals the gap between the door and the jamb, keeping out drafts, pests and moisture. This will also keep your energy costs down. If you inspect your doors and windows you can tell whether the weatherstripping should be replaced or not.

There are many types of weatherstripping that are available, including felt, open-cell foam and thermoplastic rubber, and metals like bronze or copper. Each has its pros and drawbacks. Open cell foam and felt are cheap, but they tend to be ineffective and visible at blocking airflow. Vinyl is more expensive, but it's also durable and resistant to moisture. Rubber is an excellent option for areas with heavy traffic since it will not wear as fast.

For installing new weatherstripping, you must first remove the doors to the frame using a screwdriver to loosen the screws for adjustment of the roller. Then, with a flathead screwscrew, unscrew plugs that hold weatherstripping at the bottom of frame. Remove the weatherstripping that was previously installed from the frame and remove any adhesive remnants. Then, trim the new to the proper length, peel off the plastic strip at one end, and apply it using a putty-blade to the jamb.

Reinstall the door, and adjust the roller screws to ensure that it sits properly in the track. Apply waterproof caulk wherever the stationary panel bypasses sliding door and where the edge of the panel meets the frame. This is a less secure seal than weatherstripping but should last for a while.

Locks and handles

Patio door handles and locks play an important role in the security of your home. Over time, they can be damaged or worn out and require replacement. In addition, the spindle that connects the interior and exterior handles could also need to be replaced.

To replace the handle on a patio door, you must remove the old one first, dislodging any screws that held it in place. After removing the handle, use a level to ensure that the patio door lock repairs near me door is straight. If the door isn't straight it could interfere with the lock. This could cause problems in the future.

Once you have the new handle Close and open it several times to ensure it works properly. If you encounter any issues, you should consult the manufacturer's guidelines or a specialist in hardware for assistance. It's recommended to lubricate the lock mechanism by using a silicone-based oil to avoid any future issues.

The most common type of patio door lock is a mortise latch. It is usually constructed of steel and is placed in a pocket that is cut into the door frame. They are usually used on sliding doors made of aluminum or wood. Before purchasing a replacement mortise lock it is important to take some measurements. It is essential to be aware of the location of the mounting holes and the position in the lock of the keyway.

Some patio door handles have an integrated locking mechanism that's integrated into the handle. The handles are rectangular key cylinder which fits inside the handle's keyway. If you have this type of patio door lock repair door, the inside tilt and slide patio door repairs outside locks are combined into one. This type of patio doors is often found on sliding aluminum doors.

If the latch on your patio door isn't able to stay closed it could be because the lock tongue may not be properly catching the hasp. Another possibility is that the sliding door is not completely parallel with the jamb on the side. The door should be opened by about an inch, then place it against the frame. This will show you if there is a gap between the door jamb and the door. If there is a gap, reposition the rollers to the bottom left or the right side of the patio until it is perfectly parallel to the jamb.

Misalignment

Over time, the door's tracks and rollers can lose their proper alignment. This could cause the door to stick or become difficult to move. This can also let drafts and cold air into your home, reducing energy efficiency. Luckily, misalignment is easy to fix and stop. Applying a silicone-based grease to the tracks and rollers can help your doors move again. This is a good option if you want to ensure that your doors are operating at their peak.

Another common problem with patio doors is a torn screen, which could be an issue or even a safety hazard. In addition, it may prevent the doors from closing and opening properly, leading to energy loss. In some instances, the screen can be repaired however in other instances, the door must be replaced. If you're experiencing a ripped screen, wash it thoroughly and try not to turn the handles of the door the wrong way when opening and closing.

Hinges can loosen as time passes due to heavy use or normal wear. Regularly tightening the screws can help correct this issue and ensure that your doors close tightly. This is a simple job that you can do yourself, but if you're not confident doing it, consult a professional to ensure your doors are securely aligned and secure.

It's also a good idea to clean your patio doors' tracks and rollers. A simple vacuuming or brushing can remove dust and debris that could impede the smooth operation of your patio doors. You can make use of a specific tool for stubborn dirt or corrosion. Checking and tightening the hinges' screws can aid in alignment, but sometimes it's necessary to replace them altogether to ensure a solid, long-lasting seal.

If your frames for your patio doors are sagging or warped they could affect their alignment and performance. The shifting or warping could be caused by foundation changes, however, it can also result from poor installation or repeated use. A professional can repair or replace your patio door frame and ensure that it is properly aligned. This will allow it to perform its best.

Rollers

Patio doors that slide are great for bringing the outside in while letting plenty of natural light, but they do require some maintenance to ensure they slide smoothly. If you notice that you need to pull the handle to get the door to move, or if it isn't as easy to slide as it did in the past then the problem could be the rollers. As time passes, the lower track may become clogged with dirt, sand, and mud that makes it difficult for the rollers to roll over. You can try cleaning it by spraying it with a lubricant such as 2Slick.

If the tracks have been cleaned but the rollers are still not moving freely, then it is time to replace them. Replacement rollers are available for your door and track. You can buy these at a variety of hardware stores, but will need someone to assist you in removing and install the rollers. Before ordering replacements, get an image of the roller assembly installed within the door frame so that experts can identify the exact model and type you need. You can also search for specific features like dimples or bumps, cutouts or flared edges to narrow down replacement options.

When the rollers are replaced then you'll need to install your sliding patio doors repairs door into its frame. You may need assistance in this regard as the door is very heavy. Check to see if there are screws securing the track to either side of the frame. If so you must ensure that they are loose enough to allow the door's bottom to slide into the channel above the frame. If you have a screen door, take it from the opening and make sure that it is free of the track and rollers.

After the new rollers are in then carefully insert the door into the frame and then swing it into place. If your rollers are adjustable you can adjust them to ensure that the door is able to be opened.