Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating upvc window repairs near me windows and doors is vital. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is substantial, you may want to use a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll have to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles could also become loose. Most often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A upvc window repair specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window repairs near me is difficult to open or if it blows open with an ease. They can be easily repaired by any skilled DIYer and are usually done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier if you have someone to help hold the frame up.

Check that the uPVC hinges are open and closed in the proper direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or due to inadequate installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to offer suggestions.

It is also essential to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window repair near me easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. It is located on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be put on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come the point when it's more economical to replace them than repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as possible.