Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window repairs near me to test the fit after you have relocated your hinges. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is often caused by screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common reason for leaking upvc window repair windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may require removal before a new layer can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window repair. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens with the breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is an easy procedure, but it is simpler if you have someone to help you hold the frame in place.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to give assistance.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also become misaligned due to wear, creating a gap where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

Your upvc window Repair windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.