Ghost Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving it with the keys you originally had. Our most recent immobiliser connects to the CAN data network in your vehicle and a unique pin must be entered to begin the engine.

Contrary to trackers ghost car immobiliser does not transmit any radio frequency signals and can't be detected using diagnostics tools. Ghost does not have LED indicators or buttons that would signal its presence in your vehicle or van.

Anti-key cloning

The ghost immobiliser was designed to combat key hacking and cloning. The device is connected to your vehicle's CAN data network and creates a unique pin code using the factory buttons on your dashboard and steering. This will stop the thief from being able to start your vehicle. If the wrong PIN code is entered, your car cannot be started which makes it impossible for them to escape with your pride and joy.

A ghost immobiliser uses a new technology which is very difficult for thieves to beat. The lamborghini ghost installer immobiliser unlike physical deterrents, such as wheel locks and steering locks that can be cut, is a discreet electronic device. It isn't recognized by thieves as it emits no radio signals and is operated in a silent manner.

This next generation immobiliser is capable of protecting your vehicle from a myriad of threats including key-hacking, cloned keys and relay attacks. It can also stop a thief adding a key or replacing your ECU as it won't allow them to start the car without first entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 doesn't require any additional key fobs or remotes for operation. It can be turned off through an app on the driver's smartphone. This makes it perfect for those occasions when you have to hand your car to valet parking or maintenance without keys.

The Autowatch ghost installation near me-II is the latest version of our groundbreaking ghost immobiliser. It is designed to be as easy and user-friendly as possible, but remains as secure as ever. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, which means that there aren't any additional wires to hide or be easily found. It also comes with an integrated feature that allows you to disarm your Ghost-II by connecting to the vehicle's Bluetooth which means you can enter and drive with no hassle.

OBD port hacking

OBD port hacking is a new technique employed by professional auto thieves to steal cars. Thieves can access your vehicle's OBD port with no more than a laptop, an app and a few cables that can be purchased online for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want from resetting fault codes and tuning your car to taking away your pride and joy in under a minute.

If you have a Ghost immobiliser fitted it can protect your vehicle from theft using this method, by making sure that a unique PIN code sequence is entered on the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start with no PIN code.

You will also need cables with OBD pins that connect to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You'll also require a cable with OBD pins that are connected to the CAN bus, these can be purchased on Amazon or Ebay for around PS50. The cable has to be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker has a connection to your vehicle's OBD port, they can send diagnostics to the system at high baud rates which can cause CAN to crash and block systems in your vehicle from functioning. This can cause your car's engine to stall or shut down.

No additional remotes or key fobs required

An immobiliser for your car is a great piece of anti theft technology used by millions of modern vehicles around the globe. An aftermarket immobiliser helps protect your vehicle by using engine ECU software that stops cars from starting if a false transponder is transmitted.

It is possible for a thief to know the code that disables an immobiliser, to disable it. The batteries in the majority of key fobs is easily removed by prying it open, so a thief can make use of a simple tool to take out the immobiliser's circuit board and replace it with a blank. Then, they'll be capable of starting your car.

With the TASSA approved Ghost 2 immobiliser (discover this), there are no additional keys or remotes required. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is done by a discrete and silent CAN data loop that cannot be detected by diagnostic tools such as those used by high tech thieves. It does not come with a traditional keyfob that has an LED indicators, which means it's inaccessible.

There will be times when you need to deactivate Autowatch Ghost 2's automatic security, for example during a valet parking or service work. The ghost CAN immobiliser has a special mode for this, referred to as "Service Mode that can be activated with just a push of an app on your smartphone. The car can still be operated, but the maximum speed is limited to 36mph.

If you'd like more information about the TASSA certified ghost immobiliser, call us now to schedule an appointment in our workshop. A member of our team will explain the process and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple process to change the PIN code

Ghost is a new generation device that protects your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personal PIN can be programmed using buttons on the steering wheel and dash. The system stops engine start and can't be bypassed as no RF signals are emitted from the device. This makes it unrecognisable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code can be altered to lock out earlier drivers or include an override code in case you forget the sequence. During installation, the installer will demonstrate how to become a autowatch ghost installer to accomplish this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence to allow your mechanic or garage can repair the car without having to know the pin code. This is great for customers who wish to surrender their vehicle for valet parking or service but don't want to give away the PIN sequence.

In contrast to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system that makes use of the buttons in your vehicle to create an unique and interchangeable PIN code sequence. The sequence is entered using the smartphone application. No additional LED indicators are thrown out, and your car is secured without chance of being disabled.

Tested for each vehicle

Contrary to key fobs which require you to press buttons and a ghost immobiliser can be hidden under your dash or steering wheel so that only you know it's there. The device is connected to the car's CAN data networks and a personalised PIN code is programmed into it by using the buttons already on your car. The system will then stop the engine from starting until this code has been entered prior to. This means that thieves can't duplicate your keys or access the OBD port to hack into your vehicle.

Ghost can be fitted in all vehicles including electric cars, motorhomes, vans, and bikes. It's also extremely versatile and can be programmed to deactivate in various scenarios. It is possible to program it to go into Valet mode, for example when the vehicle is transferred to a valet service or parking company. This means that your car can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will reactivate itself when it returns to your property.

Another excellent feature is that the device can be reset to your personalised PIN code at any time. This is a great option if you lose the code, or in the event that the device becomes unusable.

The device is also completely unnoticed by anyone who doesn't know what it is. It works by running through the buttons on your car's dashboard and steering wheel and uses the data they send to recognise the buttons that have been hit. This makes it a completely secure and reliable security system that cannot be compromised by jamming, RF scanning, or door lock pick sets.