UPVC Door Handles Replacement Guide

Once you have the right measurements, replacing the upvc door handles is a straightforward DIY project. These measurements include the distance from the handle's backplate mounting centres (sometimes called PZ) to the centre of keyhole.

The most common type of uPVC door handle is one with two inline levers, one internal and one external that is connected via spindle. They operate the multi-point lock found in uPVC, aluminium door handle and some wooden doors.

Brands and Finishes

A damaged uPVC handle can be much more than a minor inconvenience. It can also leave your home vulnerable to burglars who can force the lock open and gain access to your home. It's important to take action when you notice your uPVC handles are breaking down.

Fortunately, it's quite simple to replace your uPVC door handles. You will only need a few tools and a few accurate measurements. In most instances, you'll just need to put in your new uPVC handles and you'll be good go. It is always recommended to select locks and handles that are of the highest standard of security.

There are many different kinds of uPVC handles available that you can choose from. These include lever/lever, pad handles, offset and snib. Lever/lever handles are very popular with homeowners and comprise of two inline handles that can be moved. Pad uPVC handles are smaller and have an offset design. This allows you to secure the outside of your house after entering.

A uPVC offset handle is made up of two pads that are fixed, and the second one movable. This type of handle is usually used on sliding patio doors. Snib handles are similar to offset handles, but they can also be used on uPVC French doors.

When selecting a replacement uPVC door handle, it's important to take into consideration the style of your current doors and windows. The handle will need to be in line with your existing doors in terms of colour and style. Certain handles are available in a variety of finishes, such as white and black. Other handles come in more stylish options, like gold or chrome.

When taking your measurements, it's vital to be sure to get the screw-to-screw dimensions right. The PZ measurement refers to the distance between the middle of the spindle hole and the centre keyhole. The screw-to-screw dimension represents the distance from the screw hole on your existing handle to the nearest screw on your door frame. It's important to measure it accurately in order to locate a replacement.

Measurement and Fitting

A uPVC door handle has two levers on each side of the lock mechanism, making it easy to operate both from the inside and outside. With a comfortable grip and strain-free functionality handles are an important part of a door's security mechanism. With the appropriate set of uPVC handles, you can be sure that your door is secure from intruders and keep it looking great at the same time.

It can be confusing to select the best uPVC handles because there are a variety of sizes and shapes to choose from. But, there are three main measurements to take into consideration when selecting a replacement for your uPVC doors. These are the backplate fixing centers key hole, lever and lever dimensions, and the spindle's diameter. Taking into consideration these factors will ensure that your new handle will be perfectly fitted to your uPVC doors and provides the perfect fit.

It's simple to measure these points but you need to be as accurate as you can. If you're not careful, you might end with an unfit handle that doesn't match the existing one and could cause issues when opening your uPVC door. The top screw in the center of the backplate is the most important measurement. This is commonly known as the PZ dimension. This measures from the keyhole's axis or lever for the handle to the centre of the screw. Generally speaking this is an measurement of 92mm however it could vary.

Check that the uPVC handles on your doors have the right number of keyspindles that you need for your multi-point locking. Ideally, these should be in line with the number of keys you use to lock and unlock your uPVC doors. Some older doors have only one spindle that locks the lock. More modern doors have two spindles, which allow independent operation both inside and outside.

The last thing you want is a drooping or sagging uPVC door handle because this can cause a great amount of stress on the internal locking mechanism and could lead to broken components. To avoid this, search for a set of uPVC door handles that have built-in spring cassettes. They aren't just beautiful but they also reduce the pressure that operates on the door locking mechanism and could give it a much longer time to last.

Broken Spring Cassettes

A problem with the tubular latch could cause a stiff door handle. It's usually a simple fix that can be achieved by repositioning the replacement handle's fixing plates inside the handle. First, open the door and ensure that there aren't any obvious obstructions on the latch plate such as loose screws or indications of internal parts poking through. If this is not the case, then one of the springs in your uPVC handles might require a change.

The simplest way to do this is to buy a door handle repair kit. The kit will come with all the tools needed to take the handles off, and then reposition the cassettes. Follow the instructions and you'll soon have a sagging / drooping uPVC double glazing handle that is fully functional.

A floppy uPVC handle can be caused by thermal contraction but it is more common to mean that the gearbox is damaged. This isn't a problem you can easily repair at home, but it will require the assistance of an expert locksmith.

It is important to use a genuine replacement gearbox to your uPVC doors. This will ensure that everything is installed correctly. Using a cheaper aftermarket part may lead to problems such as a faulty multipoint lock or less security for your property.

Another option is replacing the whole uPVC handle mechanism and lock. This will not only fix the issue of sagging but also make sure that the door handle is operational and secure. This is not an inexpensive or quick fix. It will require the removal of the old aluminium window handles uPVC handles and replacing them with a new handle. This is only applicable to double glazing window handles-glazed doors that have sprung window handles replacement, as the door will have to be redrilled. You can also purchase a set of handles with springs that are built in. This will save you time and money.

Can I put a uPVC door handle on an aluminum or timber door?

There are many aspects to take into consideration when choosing the right doors for your home. uPVC doors offer durability, security, and energy efficiency. Likewise, aluminum doors are modern and pleasing to the eye. Regarding the style of door you want to fit the appropriate handle is vital. It is important to choose the appropriate handles for your property regardless of whether you're replacing your old ones or installing new ones. Our uPVC replacement door handle guide will help you to make the right decision and install it with confidence.

Switching a uPVC handle is relatively easy and requires only a few tools. You will first have to remove the current handle. This can be accomplished by unscrewing the screws that secure it using the screwdriver. Once the screws are removed, you can simply pull the handle away from the door.

The next step is to measure the dimensions of the door handle. To accomplish this, you'll need to find the centre of the back plate fixing holes. This is commonly known as the PZ measurement, and determines the handle spindle size. Once you have this information, you will be able to buy a door handle replacement that is of the correct size.

There are many different types of uPVC door handle available to satisfy your individual needs. Some are designed to provide extra security features such as anti-drill, cylinder guards, and mole grips. These uPVC handle designs are able to be installed on uPVC or aluminium doors and are ideal for those looking for increased security for their home.

If you are seeking a more traditional uPVC handle, there are also options that will suit your needs. These are available in a variety of finishes that include chrome, gold and black. They're generally more expensive than standard handles, but will add a beautiful look to your door.

After you have selected the appropriate uPVC door handle, it's important to verify the dimensions prior to placing an order. You must verify the dimensions mentioned above, along with the lever and keyhole dimension and the backplate mounting centres to ensure that your new handle is the right one for your door.