Protect Your Pride And Joy With The ghost immobiliser birmingham Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be altered up to 20 times. This will then allow your vehicle to start.

Simple PIN code Change Process

With the growing rate of vehicle thefts, many owners are looking to improve their security. There are many different types of security products that are available for sale including tracking systems, alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can help you locate your vehicle if it's stolen however it cannot prevent the crime. Immobilisers, on the contrary are exactly what they say on the tin - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ghost device generates a unique sequence which must be entered before the car's engine can start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially useful if you need to give your car away to a valet service or parking, as the immobiliser is active and not deactivated.

The Ghost is a unique and ingenious device that works in conjunction with buttons on your vehicle rather than as a separate unit. This means that it is not only a highly effective deterrent against vehicle theft but also a transferable device to any future vehicles you own, making it how much is a ghost immobiliser more of an investment than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch ghost immobiliser is a high-tech security system that guards your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology and cannot be identified by conventional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons on your vehicle such as steering wheel, centre console or door panels to create a unique, customizable disarm sequence. The sequence can be extended to 20 presses for extra security. The iPhone app only allows one connection, with an individual pairing code for the ghost alarm installation. All communication between the two devices is protected.

The ghost 2 immobiliser near me stops car thieves from adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can transfer your vehicle to a valet service for maintenance without having to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals that block your car's system from performing its normal start-up routine until you input a custom passcode. The system can be turned on or off through your smartphone's app, without the need for extra wires.

Standard factory immobilisers for automobiles function through a transponder built into the key that sends an indication to the ECU. If the correct code is sent, the car will start however if the transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This enables the vehicle to be stolen and started. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It safeguards your vehicle from key cloning, hacking and even key theft. The only way thieves could take your vehicle is physically towing it away, and even then they would not be capable of driving it.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the doors, to generate a unique PIN code that needs to be entered in order to use your vehicle. This is not required to use extra hardware such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is concealed within the vehicle to ensure that it can't be taken away or disabled by thieves. It's more difficult to remove than a car alarm that requires disarming via an action sequence. This makes it a fantastic complement to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of vehicles that have been stolen using the latest technology tools. This includes key-cloning and hacking devices that allow you to start your car without the original key fobs.

Our porsche 911 ghost installer (what do you think) immobiliser is designed to combat this and provide you with an extra layer of security how to become a ghost immobiliser installer prevent your vehicle from being targeted by thieves. It works by creating an individual pin code push sequence using your existing buttons on the steering wheel, door panel and the centre console. This unique PIN must be entered along with your original key fob in order to prevent the vehicle from getting started. The unique override pin can be found on the black card that you will receive after installation. It's easy to remember since there are no LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify what type of security systems you have installed. This makes it an excellent alternative to the tracker.

In contrast to other security systems, which have an engine relay bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to an analog alarm immobiliser or tracker. This should be specified prior to installation. They are also compatible with service/valet modes and a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical issue.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. With easy access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to take your pride and joy. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys were cloned or your vehicle has been hijacked.

It connects directly to your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects against adding an additional key or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is hidden within your car, using buttons on the steering wheel, centre console & door panels. A unique & changeable PIN code sequence that can be as long as 20 digits has to be entered before you can start your vehicle.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being moved away or even started in the event that a PIN code hasn't been entered prior to. If the device is armed and you attempt to drive off it will display a warning on your dash, which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point it will disarm the anti-hijack and your car will continue to operate just as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and will require a new PIN code every time you attempt to start your car.