Protect Your Pride And Joy With The bmw x5 ghost installer; please click the next document, Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence up to 20 presses. This will then allow the startup of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are a variety of aftermarket security devices available from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. While a tracking device can help you find your vehicle in the case of theft, it will not stop the crime from occurring in the first place. An immobiliser, on contrary, does exactly what is ghost immobiliser it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your car.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered to allow the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This option is particularly useful if you need to surrender your car for valet parking or maintenance, as the immobiliser is activated and not disabled.

The Ghost is a very unique and ingenious device that works in conjunction with buttons in your vehicle rather than as a separate device. This means that it is not just a powerful deterrent against vehicle theft but also a transferable device onto any other vehicles you may own, making it more of an investment than a traditional steering wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices which is a common technique used by thieves to get around the immobilisers in place.

The advantage of using CAN data is that it operates silently in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch ghost immobiliser installers near me does not produce LED indicators and instead uses the buttons in your vehicle like the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses for added security. The iPhone app allows only one connection, with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start when a valid PIN code is entered. It is able to be operated temporarily in valet or service mode (with parameters set such as 30mph speed limit) and, therefore, you can offer your vehicle to a valet or service without entering a code.

Each vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from running its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated by using your smartphone app without the need for extra wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. This sends a message to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be stolen and started. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It guards you against hacking or key cloning and even key theft. Only by physically towing your vehicle away can thieves steal it and not be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, as well as the door panels, to generate an individual PIN code that needs to be entered to use your car. This is not required to use additional hardware, such as key fobs and can last up to 20 presses long. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are unable to make use of sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.

Unlike physical anti-theft devices like clamps or wheel locks, ghost immobiliser near me is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves. It's also harder to remove from a car alarm which requires disarming using an action sequence. This makes it a perfect complement to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You don't need to go far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. This includes key-cloning and hacking devices that allow you to start your car without your original key fobs.

The Ghost immobiliser has been designed to combat this and provide you with an additional layer of security to keep your vehicle from being targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel and on the centre console. The unique pin code must be entered along with your original key fob to prevent the vehicle from starting. The unique PIN for override is on the black card that you will receive following installation. It's easy to remember as there aren't any LEDs.

The device is hidden in the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell the security system you have installed. This makes it a great alternative to the tracking device.

Unlike other security systems, which use a relay in engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely through a digital block of commands that is sent to both the ECU and the engine.

They can also be connected to an analog alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with service/valet modes and is a great alternative to a tracking device if you bring your vehicle to the dealer to address an electrical issue.

Service/Valet Mode

In recent years, there has been an increase in vehicles being stolen with the owners' keys. With the ease of access to key cloning tools and door lock pick sets, it is now much easier for thieves to steal your joy and pride. We've developed the Autowatch ghost immobiliser installer Immobiliser to combat this. It blocks your car from being driven, even if your keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely silent as it doesn't use radio frequencies or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also stops you from introducing a new ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden within your vehicle and is accessible via buttons on your steering wheel, centre console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits has to be entered before you are able to start your vehicle.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car being driven away or started if a PIN code isn't entered before. If you're driving away with the device in motion it will display an indicator on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN at this time the indicator will continue to flash and will require a new PIN each time you attempt to start your car.